Heat Sink Compound Dow Corning 340

Heat Sink Compound Dow Corning 340

Product Details

The Heat Sink Compound Dow Corning 340 has a Non-flowing thermal interface material which increases reliability, MIL-DTL-47113 compliant.

Description

Dow Corning® brand thermally conductive compounds are grease like silicone materials, heavily filled with heat-conductive metal oxides. This combination promotes high thermal conductivity, low bleed and hightemperature stability. The compounds are designed to maintain a positive heat sink seal to improve heat transfer from the electrical/electronic device to the heat sink or chassis, thereby increasing the overall efficiency of the device.

Importance of Thermal Management in Electronic Devices

Electronic devices are continually designed to deliver higher performance. Especially in the area of consumer electronics, there is also a continual trend towards smaller, more compact designs. In combination these factors typically mean that more heat is generated in the device. Thermal management of electronic devices is a primary concern of design engineers. A cooler device allows for more efficient operation and better reliability over the life of the device. As such, thermally conductive compounds play an integral role here.

Properties of Thermally Conductive Materials for Improved Heat Transfer

Thermally conductive materials act as a thermal “bridge” to remove heat from a heat source (device) to the ambient via a heat transfer media (i.e. heat sink). These materials have properties such as low thermal resistance, high thermal conductivity, and can achieve thin Bond Line ®™ Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow. Dow Corning is a registered trademark of Dow Corning Corporation. The Corning portion of the Dow Corning trademark is a trademark of Corning, Incorporated, used under license. We help you invent the future is a trademark of Dow Corning Corporation. 2017, May 30 XIAMETER is a registered trademark of Dow Corning Corporation. Form No. 11-3359B-01 ©2012–2017 Dow Corning Corporation, a wholly owned subsidiary of The Dow Chemical Company. All rights reserved. 2 Thicknesses (BLTs) which can help to improve the transfer of heat away from the device.

Features & Benefits

  • Non-flowing
  • Moderate thermal conductivity
  • No need for ovens or curing
  • Heat flow away from electronic components can increase reliability
  • Compliant with MIL-DTL-47113
  • Composition

Zinc Oxide
Polydimethylsiloxane

Applications

Dow Corning® 340 Heat Sink Compound is suitable for thermal coupling of electrical/electronic devices to heat sinks.

Shop for other Electrical Lubricants offered from Aloufy here.



Comments

Post a Comment

Popular posts from this blog

Best Electrical & Hazardous Equipment supplier in KSA

Image
 Best Electrical & Hazardous Equipment supplier in KSA Over 35 years, Aloufy Electricals has proven to be the Best Electrical & Hazardous Equipment Supplier in KSA has aided various prominent ARAMCO / SABIC projects and has a remarkable record for locating right supplies for significant projects.  The urgent acquisition of resources from abroad is our major strength & core skill.  We also keep a substantial stock to avoid lengthy lead times & potential project delays, based on their specific project demands.
Read more

Flint Gun Thermoweld

Image
  Flint Gun Thermoweld Product Details This is the Flint Gun Thermoweld. To ignite the starting powder in an exothermic weld mold, a Flint Ignitor is a cost-effective option. Pulling the trigger causes the flint ignitor to spark, and when held up to the ignition port of a mold it can start the chain reaction required to complete your exothermic connection. A 36” extension for the flint ignitor is available for applications that require the user to be away from the mold during ignition. Aloufy Advantage Aloufy Electricals acquires quality materials for significant projects and has assisted prestigious ARAMCO/SABIC projects for years. Our main strength and core competency is the urgent acquisition of resources from abroad. We stock materials for each client's unique project needs to eliminate long lead times and project delays. Place your enquiries with Aloufy. We would be glad to help you choose the right products. Aloufy Electricals supplies electrical items to the Saudi Arabian co
Read more

Pvc Inspection Pit 300 x 200 x 158mm pt205 Furse

Image
Pvc Inspection Pit 300 x 200 x 158mm pt205 Furse Product Details The Pvc Inspection Pit 300 x 200 x 158mm pt205 Furse, which is a  lightweight, heavy-duty inspection pit with its unique design has resulted in performance capabilities superior to the traditional concrete pit, at a similar cost. Manufactured from a high-performance polymer, the lightweight, heavy-duty inspection pit is UV-stable and chemical resistant The lightweight pit weighs only 1.8 kg and yet is load rated to an impressive 5,000 kg. It has a lockable lid and an improved working area compared to the concrete inspection pit. In addition, the features incorporated within its design ensure ease of storage, reduced transportation costs, ease of installation, and ease of subsequent inspection and testing of the earth electrode system, therefore providing significant practical benefits to both installers and specifiers alike. Features and benefits ● Lightweight construction The earth pit weighs only 1.8 kg, in comparison w
Read more